Attention – There are two protective films on both sides of the FEP sheet, make sure they are removed before installing.
Compatibility – Fit for most LCD 3D resin printers with screen from 5.5'' to 6.08'', such as Elegoo Mars/Anycubic Photon/ Creality LD002R/LONGER Orange, etc..
Water Washable – Doumii 3D Resin could be washed easily by water instead of 95% ethyl alcohol,save your money, save your time.
Excellent Fluidity – The formula of Doumii 3D printing resin has been optimized for Low Viscosity which could shorten curing time and being easy for cleaning the vat and the miniature.
The MEGA R3 complete starter kit with more than 200pcs components and it is 100% compatible with Arduino IDE.
Free PDF tutorial in the CD (more than 35 lessons). LCD1602 module and GY-61 sensor module with pin header ( no need to solder by yourself). You can also download the same tutorials online from our official website.
Experience Seamless Compatibility - Our Nano Board is Compatible with Official Boards and Uses the Same Chips 340 as the Official Version.
Get More with Smallest - Our Nano Board is the Smallest, Complete, and Breadboard. It has everything that Diecimila/Duemilanove has (Electronic aspects) with more analog input pins and onboard +5V AREF jumper.
【Bright and Stunning Colors】With high quality pigments and photo-initiators inside 8K photopolymer resin, the models printed with ELEGOO 8K standard photopolymer resin have a very pure and stunning color effect, just like an artwork.
【High Precision and Low Shrinkage】Extensive tests are done to verify low volume shrinkage and high printing accuracy of the 8K standard photopolymer resins before they are released to the public. Excellent dimension tolerance and low volume shrinkage ensure high precision of the printed models with incredibly smooth surface finishes, clear details, and accurate dimensions.
【Water Washable, no IPA Needed】 Instead of using IPA to clean up the prints, you can use tap water to wash the prints, save your money on IPA. ELEGOO 3D resin is formulated with high-quality pigments and photoinitiators, so that each model printed has beautiful color display just like an artwork.
【Fast Curing and Excellent Fluidity】 ELEGOO water washable has low viscosity and excellent fluidity. It can be rapid prototyping, developed to reduce printing time, great for making functional parts.
ELEGOO Water Washable Photopolymer Resin is compatible with the most LCD 3D printers using the 405nm wavelength light source. It’s specifically designed for LCD/LED light source to achieve better printing quality. Instead of using IPA to clean up the prints, you can use tap water to wash the prints.
The water that washed the water washable resin models can not be poured directly into the sewer or sink. It should be placed under the sunlight to completely cure the remainIng resin in the water before processed to avoid environment pollutioin.
Refreshing Resin Printing: ELEGOO USB-powered air purifier comes with a built-in activated carbon cube to absorb and filter the irritant resin odor during printing at a super adsorption rate, creating a fresh and safe printing environment.
Plug and Play: The plug-in air purifier is directly connected via a USB interface at the rear of the printer chamber, with a longer lifespan and no more worry about standby time.
【2 in 1 Washing & Curing Machine】 Wash and Cure 2 in 1 design makes washing and curing for 3D printed models realized in one machine. The operating process is more efficient with less time to meet your different needs. Compatible with most LCD/DLP/SLA 3D printers such as ELEGOO 3D Printers, ANYCUBIC Photon and so on.
【Newest Upgraded Curing Mode & Intelligent Time Control】 Brand-new lamp board design ,double row high-power 405nm lamp beads(8+8), together with the 360° rotating curing turntable can fully utilize the light source to cure the models evenly. Fans-less design reduces the noise. 0.96inch LCD screen and timer settings can visually display and set cleaning and curing time.
The MEGA R3 complete starter kit with more than 200pcs components and it is 100% compatible with Arduino IDE.
Free PDF tutorial in the CD (more than 35 lessons). LCD1602 module and GY-61 sensor module with pin header ( no need to solder by yourself). You can also download the same tutorials online from our official website.
Experience Seamless Compatibility - Our Nano Board is Compatible with Official Boards and Uses the Same Chips 340 as the Official Version.
Get More with Smallest - Our Nano Board is the Smallest, Complete, and Breadboard. It has everything that Diecimila/Duemilanove has (Electronic aspects) with more analog input pins and onboard +5V AREF jumper.
【Bright and Stunning Colors】With high quality pigments and photo-initiators inside 8K photopolymer resin, the models printed with ELEGOO 8K standard photopolymer resin have a very pure and stunning color effect, just like an artwork.
【High Precision and Low Shrinkage】Extensive tests are done to verify low volume shrinkage and high printing accuracy of the 8K standard photopolymer resins before they are released to the public. Excellent dimension tolerance and low volume shrinkage ensure high precision of the printed models with incredibly smooth surface finishes, clear details, and accurate dimensions.
【Water Washable, no IPA Needed】 Instead of using IPA to clean up the prints, you can use tap water to wash the prints, save your money on IPA. ELEGOO 3D resin is formulated with high-quality pigments and photoinitiators, so that each model printed has beautiful color display just like an artwork.
【Fast Curing and Excellent Fluidity】 ELEGOO water washable has low viscosity and excellent fluidity. It can be rapid prototyping, developed to reduce printing time, great for making functional parts.
ELEGOO Water Washable Photopolymer Resin is compatible with the most LCD 3D printers using the 405nm wavelength light source. It’s specifically designed for LCD/LED light source to achieve better printing quality. Instead of using IPA to clean up the prints, you can use tap water to wash the prints.
The water that washed the water washable resin models can not be poured directly into the sewer or sink. It should be placed under the sunlight to completely cure the remainIng resin in the water before processed to avoid environment pollutioin.
Refreshing Resin Printing: ELEGOO USB-powered air purifier comes with a built-in activated carbon cube to absorb and filter the irritant resin odor during printing at a super adsorption rate, creating a fresh and safe printing environment.
Plug and Play: The plug-in air purifier is directly connected via a USB interface at the rear of the printer chamber, with a longer lifespan and no more worry about standby time.
【2 in 1 Washing & Curing Machine】 Wash and Cure 2 in 1 design makes washing and curing for 3D printed models realized in one machine. The operating process is more efficient with less time to meet your different needs. Compatible with most LCD/DLP/SLA 3D printers such as ELEGOO 3D Printers, ANYCUBIC Photon and so on.
【Newest Upgraded Curing Mode & Intelligent Time Control】 Brand-new lamp board design ,double row high-power 405nm lamp beads(8+8), together with the 360° rotating curing turntable can fully utilize the light source to cure the models evenly. Fans-less design reduces the noise. 0.96inch LCD screen and timer settings can visually display and set cleaning and curing time.
The MEGA R3 complete starter kit with more than 200pcs components and it is 100% compatible with Arduino IDE.
Free PDF tutorial in the CD (more than 35 lessons). LCD1602 module and GY-61 sensor module with pin header ( no need to solder by yourself). You can also download the same tutorials online from our official website.
Experience Seamless Compatibility - Our Nano Board is Compatible with Official Boards and Uses the Same Chips 340 as the Official Version.
Get More with Smallest - Our Nano Board is the Smallest, Complete, and Breadboard. It has everything that Diecimila/Duemilanove has (Electronic aspects) with more analog input pins and onboard +5V AREF jumper.
【Bright and Stunning Colors】With high quality pigments and photo-initiators inside 8K photopolymer resin, the models printed with ELEGOO 8K standard photopolymer resin have a very pure and stunning color effect, just like an artwork.
【High Precision and Low Shrinkage】Extensive tests are done to verify low volume shrinkage and high printing accuracy of the 8K standard photopolymer resins before they are released to the public. Excellent dimension tolerance and low volume shrinkage ensure high precision of the printed models with incredibly smooth surface finishes, clear details, and accurate dimensions.
【Water Washable, no IPA Needed】 Instead of using IPA to clean up the prints, you can use tap water to wash the prints, save your money on IPA. ELEGOO 3D resin is formulated with high-quality pigments and photoinitiators, so that each model printed has beautiful color display just like an artwork.
【Fast Curing and Excellent Fluidity】 ELEGOO water washable has low viscosity and excellent fluidity. It can be rapid prototyping, developed to reduce printing time, great for making functional parts.
ELEGOO Water Washable Photopolymer Resin is compatible with the most LCD 3D printers using the 405nm wavelength light source. It’s specifically designed for LCD/LED light source to achieve better printing quality. Instead of using IPA to clean up the prints, you can use tap water to wash the prints.
The water that washed the water washable resin models can not be poured directly into the sewer or sink. It should be placed under the sunlight to completely cure the remainIng resin in the water before processed to avoid environment pollutioin.
Refreshing Resin Printing: ELEGOO USB-powered air purifier comes with a built-in activated carbon cube to absorb and filter the irritant resin odor during printing at a super adsorption rate, creating a fresh and safe printing environment.
Plug and Play: The plug-in air purifier is directly connected via a USB interface at the rear of the printer chamber, with a longer lifespan and no more worry about standby time.
【2 in 1 Washing & Curing Machine】 Wash and Cure 2 in 1 design makes washing and curing for 3D printed models realized in one machine. The operating process is more efficient with less time to meet your different needs. Compatible with most LCD/DLP/SLA 3D printers such as ELEGOO 3D Printers, ANYCUBIC Photon and so on.
【Newest Upgraded Curing Mode & Intelligent Time Control】 Brand-new lamp board design ,double row high-power 405nm lamp beads(8+8), together with the 360° rotating curing turntable can fully utilize the light source to cure the models evenly. Fans-less design reduces the noise. 0.96inch LCD screen and timer settings can visually display and set cleaning and curing time.