Car chassis plug
8-10 of 400 results

Twozoh XLR Male to 1/4 Inch Jack TRS Cable 0.3M, balanced 6.35mm Plug to 3-pin XLR Male, Quarter inch to XLR Stereo Male to Male Guitar Cable

• 🎤Ultra Durable & Flexible Design: XLR to 6.35mm plug uses gold plated, good electrical conductivity, oxidation resistance and wear resistance, plug and pull tests to 15000+ times Heavy, No deformation & rust.
• 🎤Stable Transmission: High strength aluminum alloy die-cast housing. Constructed with multi-layers of shielding minimize signal interference and ensure the transmission stable, provides maximum cancellation of hum and noise.

ANNNWZZD 1/4 Inch to XLR Cable 5M 2 pack, 6.35mm TRS to 3 Pin XLR Male Balanced Interconnect Cord Patch Cable

• 【 XLR Male to 6.35mm Cable】: This cable is designed to convert a balanced TRS output to a balanced XLR input. It is widely used as speaker cable for powered speakers. Easily connects to electronic musical instruments such as microphones, mixers, power amps, effects, decoders, electronic organs, electric guitars and electric basses.
• 【Durable Material】: Our TRS cable is made of heavy Duty Flexible Rubber and PVC jacket, it has good toughness and elasticity. It is very easy to clean and maintain. The inner material is oxygen-free pure copper with anti-stretch fiber, double shielding (aluminum foil + 64 copper braid). Main Features: Waterproof, Soft, Environmental and has strong durability and good conductivity.

Lodokdre XLR 3 Pin Male-Male Inline Connector/Adaptor/Coupler For Inline Mic Microphone

• Perfect for connecting two cables or extending existing cables.
• 3-pin XLR coupler male plug to male plug.

Onsolo 3.5mm Cable Microphone SC7 TRS to TRRS Patch Adapter Right Angle Mic Cord Aux Mic Cable for iPhone Smartphone Audio Mixer Camera Recorder Car Speaker VideoMicro Go BOYA

• Our trs to trrs adapter is made of oxygen free copper with high tensile strength. Microphone cable durable and not easy to break.
• Compatibility: This male to male audio cable replaces the Rode SC7 3.5mm TRS with a TRRS spiral cable. It can connect Boya microphone, Rod VideoMic/VideoMic GO/ VideoMicro to iPhone, iPad, Android phones, etc.

Stagg SMC3 BL 3 m 3-Pin XLR Male to Female Microphone Cable with Blue Ring & SAC3PXM DL 3m/10 ft Deluxe XLR Male to Jack Cable

• Product 1: S Series: High Quality
• Product 1: XLR 3-Pin Male to Female.

Adam Hall Cables 4 STAR DGH 0300 DMX Cable REAN XLR 5-Pin Female to XLR 5-Pin Male 3 m

• Professional DMX, AES/EBU cable from our 4 Star series
• With high-quality REAN (A brand of the Neutrik Group) connectors

Mr. Gadget's Solutions Converter XLR Male To XLR Female Connector For Cables XLR 3-Pin And 5-Pin Leads Equipment

• Gender: Female-Male
• Item Type: XLR

Zunate USB C to XLR Female Cable, USB C Microphone Cable USB C to XLR Audio Connector Low Noise HIFI Stereo Audio Cable Plug and Play for Smartphones, Tablet, Laptop (2m)

• Compatible: Recording line is suitable for almost all computers with type C port, such as for Windows 98SE 2000 XP VISTA, for Win7, for Win 8, for Win 10, for OS X. Compatible with most recording software such as for GarageBand, for Guitar Combo Amps, for Audacity, for Amplitude, for Yousician.
• High Sampling Rate: This type C microphone cable supports 44.1 kHz and 48 kHz sampling rate. Designed to transmit mic piano, bass, signals into a computer. Also great for stage and studio use.

Keple XLR Plug 3 Pole Chassis - Male Jack 3 Pin Solder Panel Mount Connector For Microphone Speaker Socket - Pack Of 2

• FEATURE - XLR 3 Pin Male for rack mount/panel units. These sockets are designed for patch bay and snake cable applications. Fixed by screws or rivets, easy to install.
• HIGH QUALITY - Super wear-resistant anti-oxidation and corrosion resistance XLR chassis can effectively reduce data loss to ensure increased signal sensitivity. Good contact, durable, long service life.

Mr. Gadget's Solutions XLR to Jack TRS Adapter, Balanced Female XLR to Quarter Inch 6.35mm Male Adapter

• Balanced XLR female to 6.35mm Jack TRS adapter; converts an XLR male output to a balanced 1/4-inch output
• Connection A: 3-Pin XLR Female Connector; Connection B: 1/4" jack TRS Plug

Dilwe RC LED Strip, 24 LEDs Chassis Light LED Strip 6V for 1/10 1/8 RC Car Crawler Buggy

• Fits For: RC Chassis Light is suitable for 1/8, 1/10 remote control car
• Function: LED light which can be mounted under chassis of RC car keeps lighted when turned on

Dilwe 6 Pcs RC Chassis Armors Set, Stainless Steel Chassis Armors Protection Skid Plate for RC Car RC Part Accessory Silver

• High-quality Material: The RC chassis armor set is made of high quality stainless steel material, which is eco-friendly, solid and durable.
• Function: This is a chassis armor protection skid plate set and it can Effectively protect the chassis of your RC car.

Dilwe RC Car Chassis Base, Chassis Skid Plates Center Frame Brace for TRX4 1/10 RC Crawler

• STABLE AND RELIABLE: When the mounting base is easily installed on the chassis, it can strengthen the rigidity of the car body and make it more stable and reliable.
• HIGH QUALITY: made of high-strength aluminum alloy material, wear-resistant and durable, not easy to deform and damage, and can ensure its long service life

Dilwe Chassis Strengthen Armor, RC Car Chassis Strengthen Part Upgrade Accessory Available for RoboMaster S1 RC Model

• Aluminum Alloy Matreial : The chassis strengthen armor is made of Aluminum alloy CNC machining, anodizing ensuring maximum durability.
• Exquisite Craftsmanship : 3MM thick aluminum alloy carved from the whole, exquisite chamfering process.

Dilwe Chassis Pull Rod, 14pcs/Set Brass Durable RC Upgrade Accessory Comaptible for TRX6 1/10 RC Car Model

• High quality brass material manufacturing ensuring maximum durability, easy and convenient for installation, reliable and durable to use.
• Brass chassis pull rod, special designed for TRX6 1/10 RC car model, effectively improve the performance of TRX6 and achieve stable and flexible driving.

Dilwe RC Chassis Armors Set, RC Chassis Armors Set Stainless Steel Chassis Protection Skid Plate for Traxxas Black

• Compability: The RC chassis armors set is suitable for Traxxas remote control car, please confirm whether your model is applicable before buying. And it can meet your different needs.
• Superior Performance: Surface drawing treatment, fine workmanship, perfect style, improve the overall performance and durability of the remote control car. And it is preferred by the knowledgeable model hobbists & RC enthusiasts.

Dilwe Chassis Rear Support Bracket, Chassis Rear Bracket Support Arm Aluminum Alloy Mount for Arrma Kraton 6S 1/8 RC Car Parts(red)

• Preminum Material: Chassis rear support bracket is made of preminum quality aluminum alloy material, and with exquisite craftsmanship, which is wear resistant, sturdy, durable and long service life.
• Wide Applicaption: Chassis rear support bracket has strong compatibility, it is widely suitable for Arrma Kraton 6S 1/8 for Monster car. And it can guarantee to meet the specification of original equipment.

Dilwe Chassis Tie Rods Links,Metal RC Chassis Links,High Clearance Pull Rods Replacement for 1/24 Crawler Car (Black)

• REPLACEMENT: RC car pull rods links are easy to install and remove, and can directly replace the original or damaged parts for higher strength.
• LIGHT WEIGHT: High clearance chassis links small size and light weight can improve the overall performance of the model car and extend its service life.

Dilwe Chassis Armors, RC Chassis Protective Plate, Stainless Steel Vehicle Chassis Armor Chassis Armor, made of stainless steel. Floor protection plate set for 4 82056-4 RC Car

• ❀❀❀ Compatible for Traxxas TRX‑4 82056‑4 RC car, fine workmanship and exquisite appearance.
• ❀❀❀ Made of high‑quality stainless steel, environmentally friendly, sturdy and durable.

Dilwe RC Chassis Armors Set, 1 RC Chassis Armors Set (6 Pcs), 16 Screw, 1 Bandage, Stainless Steel Chassis Armors Skid Plate for Traxxas

• Applicable Model: The RC chassis armors set is applicable for Traxxas remote control car, please check the model before ordering.
• Direct Fit: Exquisite craftsmanship, direct installation in the original car hole position, no need to drill holes, original car screw hole installation.

The Mediterranean Vegan Kitchen: Meat-Free, Egg-Free, Dairy-Free Dishes from the Healthiest Region Under the Sun

Rebuild Aircooled Vw Engines Hp255: How to Troubleshoot, Remove, Tear Down, Inspect, Assemble & Install Your Bug, Bus, Karmann Ghia, Thing, Type-3, Type-4 & Porsche 914 Engine

• How to Rebuild Your Volkswagen air-Cooled Engine (All models, 1961 and up)

Advanced Race Car Chassis Technology: Winning Chassis Design and Setup for Circle Track and Road Race Cars

Custom Auto Wiring & Electrical HP1545: OEM Electrical Systems, Premade & Custom Wiring Kits, & Car Audio Installations for Street Rods, Muscle Cars, Race Cars, Trucks & Restorations

Welder's Handbook: A Guide to Plasma Cutting, Oxyacetylene, ARC, MIG and TIG Welding, Revised and Updated

The Electric Vehicle Conversion Handbook HP1568

Vegan Italiano: Meat-free, Egg-free, Dairy-free Dishes from Sun-Drenched Italy

The Gluten-Free Vegetarian Kitchen: Delicious and Nutritious Wheat-Free, Gluten-Free Dishes

How to Rebuild Small-Block Chevy LT-1/LT-4 Engines

How to Make your Car Handle HP46: Pro Methods for Improved Handling, Safety and Performance

• Hp Books

Dilwe RC Wearing Parts Set, 15g Plastic Rear C Blocks Steering Cup Kit Replacement Part for WLtoys 144001 1/14 RC Car

• Wear and Corrosion Resistant : Keep your RC car running like new again. These are made of high quality plastic material that is durable, abrasion and corrosion resistant.
• Improve Overall Performance : RC parts are precisely engineered so that maximum energy transfer is possible. Improve the overall performance of the RC car.

Dilwe RC Body Shell Clip, Secure Shell Pin+ Mounting Bracket Set, Aluminum Alloy Accessories Auto Parts Suitable for Traxxas 1/5 1/8(Black)

• ★★★ Shell clip made of high quality aluminum alloy and steel, durable and for long-term use, good rigidity, high toughness and no deformation.
• ★★★ "Stupid Installation", installation is very easy.

Dilwe RC Car Tire, 2PCS 1/14 Wheel Tyres Spare Part Fit for Wltoys 144001 RC Car Model Parts(144001-1270)

• 【Strong Grip Ability】The RC car tire use special designs and precision workmanship of the tire has strong grip ability.
• 【Wider Design】The RC car tire adopt wide design, can effectively increase the stability and performance of RC car

Dilwe RC Motor Servo Tester, CCPM Servo Consistency Master Motor Tester ESC Checker for RC Plane Car Boat RC Model Part Accessory

• Basic Function: It can test analog and digital servos as well as control the ESC. Testing three servos simultaneously whether they are synchronized or not that this function is mainly for CCPM mode.
• Basic Function: It can test analog and digital servos as well as control the ESC. Testing three servos simultaneously whether they are synchronized or not that this function is mainly for CCPM mode.

2PCS 4LED RC Roof Lamp Light Bar Brightness 17mm Spare Parts Compatible with RC Traxxas AXIAL Model Car

• 【High Quality】The RC roof light is made of high quality metal and plastic, resistant to wear and corrosion, is great accessory for model parts.
• 【Three Modes】The RC roof light has three modes of long bright/strobe/breath, which support remote signal control and manual contact control.

RC Chassis Armors Set, Stainless Steel Chassis Armors Protection Skid Plate Available for Traxxas 82056-4 RC Car Upgrade Part(Silver)

• Compatible with: The RC chassis armor is specially compatible with Traxxas 82056-4 RC car, it is a great upgrade part for your RC car.
• Premium Material: This remote control chassis armor is made of high quality stainless steel, which is eco-friendly, solid and durable to use.

RC Car Tow Hook Trailer Chain Set, RC U Shaped Rescue Tow Hook Trailer Chain Assemble Parts for RC Climbing Crawler Car Upgrade Part

• Fit For: The RC car U shaped rescue tow hook component is specially designed for 1/10 scale RC cars.
• Premium Material: The RC car trailer safety chain set is made of high quality metal material, which is solid and durable.

Dilwe RC Car LED Light Bar, 55mm RC Crawler LED Light Bar LEDs Lamp Accessory Compatible with for TRX4 90046 90048 SCX10 1:10 RC Car

• 【Simple installation】: Can be used to replace old or damaged light bars, easy to install. This will be an excellent accessory for your remote control model car.
• 【Lightweight】: The light bar is light-weight and easy to carry, without adding extra burden to the remote control model car.

4pcs RC Car Drive Shaft,Durable Steel Universal Drive Shaft Swing Shaft for HSP 94111 1/10 RC Car Upgrade Parts(Silver)

• 【Sturdy material】:RC Car Drive Shaft is made of excellent steel materials, fall resistant and durable,have a long service to use
• 【CNCmachining】:Fine workmanship,after CNC machining makes the size accurate, stable performance and improve the performance of the remote control car.

Dilwe RC Shock Damper Tower, RC Shock Damper Tower Mount Aluminum Alloy RC Rear Front Shock Tower for Tamiya TT02 Upgrade(Blue)

• Preminum Material: RC shock damper is made of finest quality luminum alloy materials, and with excellent workmanship, which has good stability and excellent performance.
• Wide Applicaption: RC shock damper tower has strong compatibility, it is widely suitable for amiya TT02 Upgrade 1/10 Flat Sports Car, and it can guarantee to meet the specification of original equipment.